GMM SYNC+/104/V35 - GMM research MM SYNC+/104/V35 communications adapter Simple Type: Expansion...
Request Quote
For Price
- Part Number:
- GMM SYNC+/104/V35
- Model Number:
- GMM SYNC+/104/V35
- Make:
- GMM RESEARCH
- Lead Time:
- Available
- Qty In Stock:
- Available
GMM research MM SYNC+/104/V35 communications adapter Simple Type: Expansion Module
The GMM Sync2+/104E/MP? can be used in a wide range of synchronous communications environments. The adapter's asynchronous capability allows it to communicate with any standard asynchronous device such as a terminal or a modem. The GMM SYNC+/104/V35 features: Two fully independent full duplex synchronous communications ports. Data rates up to 1 MBPS (must use DMA). Full Duplex DMA on both serial ports. All four DMA channels are selected by software.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 128 byte EEPROM of which 96 bytes are available for customer use.
- Data rates up to 1 MBPS (must use DMA).
- Eight software selectable interrupt channels IRQ 2, 3, 4, 5, 10, 11, 12, and 15.
- Full Duplex DMA on both serial ports. All four DMA channels are selected by software.
- MP Version: RS-232, V.35, RS-422, RS-485, RS-449, EIA-530, EIA-530A, or V.36 V35 Version: V.35 (only)
- Port 2 (J2) can be configured via software to any of the following electrical interfaces independently for each transmitter and receiver.
- Switch selected I/O address.
- The GMM Sync2+/104E/MP? uses the industry standard Z85230 Serial Communications Controller.
- The GMM Sync2+/104E/MP? supports the following synchronous modes. Sync, BiSync, MonoSync, HDLC, and SDLC using NRZ, NRZI, FM, and Manchester data formats.
- Two fully independent full duplex synchronous communications ports.
Specifications
- Baud Rate: Up to 1 MBPS.
- Computer: PC-104 bus PC or compatible.
- DMA Channels: 0, 1, 2, and 3. Both Transmit and Receive DMA supported.
- I/O Base Address: Switch selected.
- Interface Configuration: DTE.
- Interface Connector(s): Two 26 pin right angle headers wired to accept ribbon cables terminated in standard male 25 pin D-sub-miniature connector with industry standard pin out.
- Interface Format: Serial, Synchronous and Asynchronous.
- MP: RS-232, V.35, RS-422, RS-485, RS-449, EIA-530, EIA-530A, or V.36. All software selected.
- Operating Temperature: Commercial Range.
- PC Interrupt channels: IRQ 2, 3, 4, 5, 10, 11, 12, or 15 (software selected).
- Power Consumption: +5 Volts @ 500 ma.
Applications
- None Available
Aliases
- None Available